Did you know that you can use the same antifreeze that you use in your car to help prevent your home plumbing from freezing? To find out how and why, as well as other great tips for how to maintain your home plumbing, read the following article right away. Check out the list we’ve compiled for you below from Gohighpuritywater.com.
You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.
When installing a new water heater you need to keep your budget in mind for the upcoming purchase. Low entry gas water heaters usually start around $200 and they usually hold 40 to 50 gallons. Higher line heaters start around $400 and they usually have extra features like 12 year warranties.
You can check your toilet for leaks by adding a few drops of food coloring, Kool Aid or some coffee grounds to the water in the toilet’s tank (not the water in the bowl). Check the water in the bowl after a half hour or so. If any of the coloring agent is visible in the water in the bowl, the tank is leaking, and you will have to have it repaired.
If your water bill seems unusually high and you haven’t changed your water usage, the problem is most likely in the service line. The cost to hire a professional to find and repair the service line most often is far greater than installing a new line and then having the old one shut off permanently.
If you are starting a plumbing project due to have discolored water, especially black, be sure to have your water tested first instead. There could be a mineral build up in your pipes or the source of the problem could be further down the line than you can reach. Most importantly you want to be sure your water is safe for drinking.
A great way to save a few dollars is to add insulation to your hot water heater. Much of the energy required to heat the water in your home is the expense from keeping the water in the tank hot for when it is needed. Adding an extra layer of insulation can help reduce this cost.
Make sure you shut off your main system before leaving your house for a few weeks. The water will stay in the pipes, but this should prevent any further damages in case a leak starts while you are away. Check that your shut-off valve is working properly before you leave.
In conclusion, you want to be sure that all of the advice you have heard about plumbing is correct. Take the time to go back over this article and decide what applies to you and what you need to learn even more about. The learning process never stops and it will benefit you greatly. Check out Gohighpuritywater.